McLaren M1 ride-on Go Kart 4 User Manual

Execuve standard:
En71 and En62115
ASTM F963-17
Photos are for reference ONLY.
Assembled by an adult.
This toy was not suitable for Children under 6 years
due to its maximum speed.
RISK OF FIRE. Do not bypass. Replace only with
original size and type.
!
WARNING:
INSTALLATIONANDOPERATING
INSTRUCTIONS
Children’s electric cars
12km/h
24V
SPEED
BATTERY
Ages
6+
Drift

McLaren M1 ride-on Go Kart 4 Specifications

General

Recommended Age	3-8 years
Weight Capacity	66 lbs
Battery	12V 7Ah
Number of Speeds	2
Charging Time	8-12 hours
Type	Ride-on
Power Source	Electric
Motor	12V
Material	Plastic
Features	LED lights

Summary

Installation Instruction

Safety Warnings

General safety precautions, battery hazards, and user requirements for safe operation.

Care Instructions

Guidelines for vehicle maintenance and storage to prevent damage and ensure longevity.

Specifications

Parts

Parts List

Comprehensive list of all parts required for assembly, with part numbers and quantities.

Assembly

Install Front Axle

Detailed procedure for attaching the front axle to the car body using provided screws and nuts.

Install Steering Axle Support

Guidance on fitting the steering axle support to the car body, including alignment and securing mechanisms.

Install Rear Axle

Instructions for correctly mounting the rear axle to the car body, ensuring symmetrical placement.

Install Wheels

Steps for attaching the front and rear wheels, including gear box connectors and wheel covers.

Install Steering Axle

Process for inserting the steering axle through the car body and steering axle support.

Install Front Bumper

Steps to attach the front bumper to the car body using nuts and washers.

Install Front Cover

Instructions for connecting the front cover, including electrical terminals, to the car body.

Install Steering Wheel

Procedure for attaching the steering wheel to the steering axle and connecting electrical terminals.

Install Backrest

Guide for fitting the backrest to the car body and securing it with screws.

Power On

Steps to connect electrical terminals to activate the car's power supply.

Install Air Intake Seat

Instructions for mounting the air intake seat onto the car body and securing it with screws.

Install Fenders

Steps for attaching the left and right fenders to the car body.

Install Rear Tail Wing and Flag

Guide for attaching the rear tail wing and flag to the car body.

Operation

Vehicle Control and Modes

Explains directional control, manual operation, and switching between Drive and Sport modes.

Recoverable Fuse

Information about the resettable fuse and its function in protecting the electrical system.

Charging Instructions

Detailed steps for safely charging the vehicle's battery, including precautions and time limits.

Troubleshooting Guide