Need help?Do you have a question about the mcmurdo SMARTFIND PLUS G5 and is the answer not in the manual?
General| Brand | mcmurdo |
|---|---|
| Model | SMARTFIND PLUS G5 |
| Category | Security Sensors |
| Language | English |
Explains the EPIRB's unique identity and the importance of country code for registration.
Details the process and requirements for registering your EPIRB with authorities.
Instructions for submitting the warranty form to McMurdo for future claims.
Explains the need to update your radio licence to include the EPIRB transmitter.
Procedures for re-programming EPIRBs when transferring to a new vessel or flag state.
Describes the manually activated EPIRB's bulkhead mounting bracket and its release mechanism.
Explains the automatically activated EPIRB's plastic enclosure and its hydrostatic release unit (HRU).
Details the slide switch, tear-off seal, and activation sequence with a 50-second delay.
Describes the function of the TEST button for running self-test sequences.
Explains the automatic activation via sea switch contacts when submerged.
Explains the visual indicators of the EPIRB, including strobe, red LED, and green LED status.
Describes the audible feedback provided by the buzzer for status and self-test results.
Details the automatic release and operation of the EPIRB when a vessel sinks.
Instructions for releasing and deploying the EPIRB when abandoning a sinking vessel.
Explains GPS receiver requirements for position acquisition and backup Doppler techniques.
Step-by-step guide on how to release the EPIRB from its bulkhead mounting bracket.
Instructions on how to remove the EPIRB from its protective float-free enclosure.
Describes the manual activation process using the tear-off tab and switch.
Procedures for turning off the EPIRB after activation, including resetting to 'ready' state.
Instructions for safely re-fitting the EPIRB into its bracket or enclosure after use.
How to contact authorities to cancel a false distress alert and avoid unnecessary rescue efforts.
Steps to manually turn off a mistakenly activated EPIRB, including drying sea contacts.
Methods to suppress a faulty, continuously transmitting EPIRB to prevent false alerts.
Guidance on selecting an appropriate location for the bulkhead bracket for optimal access and function.
Step-by-step instructions for securely mounting the bracket and associated instruction plate.
Advice on choosing the best location for the float-free enclosure for proper ejection and access.
Detailed steps for mounting the float-free enclosure using its backplate and supplied fixings.
Instructions for mounting the instruction plate next to the EPIRB enclosure for emergency guidance.
How to mark the HRU expiry date on the unit and enclosure for timely replacement.
Guide to marking the vessel name on the EPIRB and enclosure labels using provided stickers.
Performing monthly self-tests and inspections to verify EPIRB readiness and GPS functionality.
Detailed visual checks of the EPIRB, lanyard, sea switches, antenna, and mounting bracket.
Step-by-step guide for replacing the Hydrostatic Release Unit (HRU) in float-free enclosures.
Information on when and how to replace the EPIRB's Lithium battery packs by an approved agent.
Guidance on obtaining servicing for the EPIRB from McMurdo approved agents.
Information on the classification of EPIRB battery packs for transportation purposes.
Details on mandatory GMDSS inspections for commercial vessels and their EPIRB checks.
Lists the EC Type Examination Certificate and declarations of conformity for the EPIRB models.
To Next Page