Do you have a question about the MD SPORTS SMUS1518435 and is the answer not in the manual?
Use a pin to clean dust from holes on the playfield for smooth airflow.
Use furniture polish spray to clean the playfield and maintain smooth airflow.
Verify that the adaptor wire is properly installed.
Ensure the control wire and electronic scorer wire are correctly installed.
If issues persist, replace the control box with a new one.
If issues persist, replace Scorer Bracket-A or Scorer Bracket-B.
Try exchanging the sensor wire on the scorer.
If the sensor wire exchange works, replace the goal with a new wire.
If problems persist, replace the control box or scorer brackets.
Ensure the "START" button on the electronic scorer is turned on.
Try re-pressing the "START" button on the electronic scorer.
Verify sensor wires are connected properly to the control box.
Re-plug the sensor wire into the control box and ensure a secure connection.
Confirm that the "SOUND(ON/OFF)" setting on the electronic scorer is enabled.
If the sound is still not working, replace the scoring sensor wire.
If problems persist, consider replacing the control box or scorer brackets.
Part number #20 for the adaptor.
Part number #25 for Scorer Bracket-A.
Part number #26 for Scorer Bracket-B.
Part number #27 for Scorer Bracket-C.
Part number #P2 for the scoring sensor wire.
Part number #p7 for the connect box.