I
I
I
I
I
I
I
MDR-2000 VJ User's Reference Manual
Overview
o Specify which type
of
records to transmit, CDR or Image records, or both.
Maintenance/Support Commands:
o Pass data from the PBX to the communications port for dynamic monitoring
of
PBX activity.
Data
is
still processed and retained by the MDR-2000.
o Send a maintenance record consisting
of
pointer values, indicator LED values, serial number,
and memory size over the communications port.
o Send an ASCII test sequence over the communications port.
o Commands to reset the MDR-2000's PBX port, the entire MDR-2000, or the MDR-2000 buffer
memory.
o Test commands to verify the integrity
of
stored data and check the RAM memories.
o View the last record rejected by the MDR-2000.
o Send an MDR-2000 identification message indicating the PBX type, MDR-2000 generic, and
software revision and serial number.
o Enter the Interactive Monitor (Described later in this document).
The interactive commands are provided by a software module called the Interactive Monitor. It
provides most
of
the functionality described above but in a more humanly engineered format. Its
purpose
is
for operational control
of
the unit. All options are set by the Interactive Monitor
to
provide complete control and configuration
of
the MDR-2000 remotely.
2-3
To Next Page
Loading...