Do you have a question about the MDS DA201R and is the answer not in the manual?
Key features of the Class-D Mono Block Power Amplifier, including stable operation and control options.
Key features of the CLASS AB amplifiers, including stable stereo operation and application compatibility.
Step-by-step guide for mounting and connecting the amplifier in a vehicle, including wiring and grounding.
Wiring diagrams for two-channel, bridged, and tri-mode speaker connections for the DA602R amplifier.
Wiring diagrams for four-channel and tri-mode speaker connections for the DA804R amplifier.
Wiring diagrams for five-channel, bridged, and tri-mode speaker connections for the DA905R amplifier.
Solutions for the amplifier not powering up or the protection LED illuminating.
Troubleshooting steps for no output, low output, single channel, hiss, squeal, or distorted sound.
Diagnosing and resolving amplifier overheating and engine noise interference.
Key features of the Class-D Mono Block Power Amplifier, including stable operation and control options.
Key features of the CLASS AB amplifiers, including stable stereo operation and application compatibility.
Step-by-step guide for mounting and connecting the amplifier in a vehicle, including wiring and grounding.
Wiring diagrams for two-channel, bridged, and tri-mode speaker connections for the DA602R amplifier.
Wiring diagrams for four-channel and tri-mode speaker connections for the DA804R amplifier.
Wiring diagrams for five-channel, bridged, and tri-mode speaker connections for the DA905R amplifier.
Solutions for the amplifier not powering up or the protection LED illuminating.
Troubleshooting steps for no output, low output, single channel, hiss, squeal, or distorted sound.
Diagnosing and resolving amplifier overheating and engine noise interference.
| Channels | 2 |
|---|---|
| Signal-to-Noise Ratio | >90dB |
| THD | <0.05% |
| Crossover Frequency (Low Pass) | 50Hz - 250Hz |
| Fuse Rating | 25A |
| RMS Power @ 4 Ohms | 100W x 2 |
| RMS Power @ 2 Ohms | 150W x 2 |
| Bridged RMS Power @ 4 Ohms | 300W x 1 |
| Input Sensitivity | 0.2 - 6V |
| Bass Boost | 0dB / +6dB / +12dB |