AutoStar #497 HANDBOX
X-Wedge Instruction Manual
5
threaded rod (without moving the compass)
until the red compass arrow points toward the
observing sites Magnetic Declination found in
step 1.
c. Tighten the t-handle tension knob, locking the
X-Wedge into place.
d. Retighten the 5/16" hex screws on the wedge
floor. Do not over tighten.
The tripod and X-Wedge are now pointed very near celestial
north and ready to run one of the alignment procedures.
55-12003_07028_XWedge_InstructionManual.indd 5 8/8/2012 11:07:52 AM
To Next Page
Loading...
