Page 15 Version 2
FAULT FINDING ELECTRICAL
CAUTION: ANY MEC MACHINE MUST BE IN THE DISARMED STATE WITH THE BATTERY
DISCONNECTED PRIOR TO MAKING ANY ADJUSTMENTS, LOADING WITH CLAYS OR
TRANSPORTING
1. Machine does not Arm
Check:
(a) Battery is charged and that connections are tight.
(b) Toggle switch is in the down ON position or on the Handheld that the “ARM” indicator light is on.
(c) There are 3 components in place to protect your electrical box.
1. Re-settable breaker. Found on the side of the electrical box. (older models have non-resettable breakers)
2. 60amp or 70amp relay. Found inside the electrical box. (automotive type)
To Next Page
Loading...