To Next Page

To Previous Page

MEC-Energietechnik GmbH Instruction manual ProTask-360SR

Vers.: 2.1-2015 2 / 4 www.mec-energietechnik.com

2. Abstract / General Informations

The lead-based battery charger of the ProTask-360SR series are provided with HF-Switching Power Technology, co-

trolled by microprocessor. The optimum of technology and an up to date 5-step charge profile guarantees an optimal and

gentle charging process for a outstanding number of charge cycles.

A special charge phase at the beginning of the charging process enables even depth discharged batteries to regenerate

and in the next step to recharge fast and safetely.

3. Special Features

 Microprocessor controlled HF-Switching Power Technology

 5-step charging profile with fully automatic,

- battery-recovery function

- softstart phase

- trickle charge phase

- restart function

 Customized charge profiles on request

 External temperature sensor

 Drive inhibit

 4 LEDs for operating and charging indication

 4 selectable charge profiles for Wet- Gel- AGM- und Calcium-Batteries

**)

 1 additional power supply mode selectable

**)

 4 LEDs for program selection display

**)

 Protected agains reverse polarity and short-circuit

**)

at multi-profile charger only

4. Equipment and scope of delivery

1. Infrared-LED

5. Green Full-LED 9. Power switch 13. External temp. sensor

2. Red Error-LED 6. Program selection-LED

**)

10. Mounting brackets Set 14. Drive inhibit

3. Green Power-LED 7. Program selector button

**)

11. Power cable 15. Minus-Pole (black)

4. Yellow Charging-LED 8. Mains socket 12. Plus-Pole (red)

for programming purpose only

**)

at multi-profile charger only

Mec ProTask-360SR User Manual

Questions and Answers: