Need help?Do you have a question about the mecalac AX 700 and is the answer not in the manual?
General| Brand | mecalac |
|---|---|
| Model | AX 700 |
| Category | Front End Loaders |
| Language | English |
Understanding symbols like NOTE, CAUTION, and DANGER for safe operation.
Guidelines for intended use and manufacturer responsibilities regarding safety.
Requirements for manuals, personnel awareness, and general safety practices.
Specifies age, suitability, training, and responsibilities for machine operators.
Safety precautions during normal operation, driving, and specific work situations.
Details on loader plates and stamped numbers for identification.
Step-by-step procedure for safely parking the articulated loader.
Explains optional electronic systems to prevent unauthorized vehicle movement.
General illustration and labeling of the articulated loader's main components.
Detailed description of undercarriage, tyres, steering, brakes, and fuel systems.
Identification and function of steering column controls, dashboard indicators, and cabin controls.
Location and identification of fuses and relays for the loader's electrical system.
Step-by-step instructions for safely removing the loader's driver's cabin.
Essential checks before starting the engine to ensure safe and proper operation.
Sequence for safely starting the loader's diesel engine.
Specific procedures and precautions for operating the loader in cold temperatures.
Safety requirements and procedures for operating the loader on public roads.
Guidelines for operating the loader's drive stages and working hydraulics.
Instructions for setting airflow, heater, and air conditioning in the cabin.
Procedures for adjusting the seat for optimal operator comfort and ergonomics.
Procedures for attaching and detaching buckets and fork-lift attachments.
Procedures for attaching and detaching multi-purpose buckets with hydraulic connections.
Information on the safe and approved use of various loader attachments.
Steps for towing the loader when the engine or drive has failed.
Instructions and safety precautions for lifting the loader using a crane.
General safety precautions and notes before performing maintenance work.
Procedures for checking and replacing the air filter, engine oil checks, and oil changes.
Steps for checking and changing oil in the front axle, rear axle, and planetary gears.
Procedures for changing hydraulic oil and replacing the hydraulic oil filter cartridge.
Identification and greasing intervals for various points on the loader.
Steps for replacing the starter battery and maintaining the fresh air filter.
Procedures for checking the service and parking brake function and fluid levels.
Troubleshooting common engine issues like starting problems and alternator not charging.
Diagnosing and resolving issues with steering sluggishness and hydraulic system performance.
Troubleshooting problems related to the parking brake not holding or braking effects decreasing.
Identifying and fixing issues with the cabin's climate control systems.
Schematic representation of the loader's electrical system and component connections.
Diagram illustrating the loader's hydraulic system, including pumps, valves, and cylinders.
Key technical specifications for the MECALAC AX 700 articulated loader.
Key technical specifications for the MECALAC AX 850 articulated loader.
Key technical specifications for the MECALAC AX 1000 articulated loader.
Specifications for attachments compatible with the MECALAC AX 700 loader.
Specifications for attachments compatible with the MECALAC AX 850 loader.
Specifications for attachments compatible with the MECALAC AX 1000 loader.
Information regarding optional features and equipment available for the loader.
Details concerning any modifications made to the loader or procedures for modifications.
To Next Page
