Do you have a question about the MED Automotive Solutions 3200 and is the answer not in the manual?
Explains system activation using remote control with ultrasonic sensor, window closing, and optional modules.
Details the process of deactivating the alarm system using the original remote control.
Describes activating and setting the speed alert function for the vehicle's speedometer.
Introduces various methods for activating and deactivating the alarm system.
Explains the function and operation of electronic keys for system control.
Details the physical process of using the electronic key with its socket.
Describes how to activate the system using the electronic key.
Explains system activation via electronic key, excluding ultrasonic sensor and other modules.
Details how to deactivate the system using the electronic key.
Explains the purpose and use of the PIN CARD for system functions.
Guides the user through creating a personal emergency code.
Instructions for pairing or removing electronic keys from the system.
Describes how to deactivate the system in an emergency situation.
Step-by-step guide on using the main and personal emergency codes.
General overview of how the system signals alarms.
Explains how door, bonnet, and boot openings trigger alarms.
Discusses integration with optional sensors for enhanced protection.
Details the automatic engine lock feature as per European directive.
Explains how the system manages power consumption.
Describes the system's behavior during a low vehicle battery condition.
Introduces system customization via user or installer programming.
Details the procedure for user-specific system programming.
Outlines the programming procedures for qualified installers.
Lists various user-configurable settings for the alarm system.
Explains how to disable the system, e.g., for repairs.
How to control direction indicator flashing during system states.
Details control over audible signals for system events.
Describes a function to prevent accidental deactivation.
Procedure to customize the siren sound configuration.
Explains the pre-alarm function for dual-zone sensors.
How to disable specific button inputs, e.g., during repairs.
Details the manual and automatic anti-car jacking functions.
Explains the pre-alarm function to avoid false alarms.
How door closing triggers alarms via specific inputs or vehicle data lines.
Describes the system's self-checking mechanism and error indication.
Information regarding the maintenance of the central unit.
Details the terms and duration of the product warranty.
Lists the homologation approvals and standards met by the product.
Configuration options for ultrasonic sensor sensitivity levels.
Settings for alarm activation based on door inputs and vehicle data.
Controls for enabling/disabling direction indicator flashing.
Settings for the pre-alarm function.
Configuration options for the anti-car jacking feature.
How to restore the system to its factory default settings.
Explains the "comfort" feature for automatic windows closing.
How to enter the system's testing mode.
Procedure for testing connected additional modules.
How to test the functionality of all system buttons.
Testing the ultrasonic sensor and adjusting its sensitivity.
How to properly exit the system's test mode.
Details how inputs are delayed during system activation.
Specifics on pre-alarm delays for dual-zone modules.
Explains the programmable input for odometer and modules.
How to restore the system to its default programmed settings.
Procedure for replacing the digital immobilizer central unit.
Technical specifications for the MED 3200 central unit.
Technical specifications for the CHD 400 keys.
Technical specifications for the SIR 050 / SIR 050.NA siren.
Important warnings regarding product tampering and modifications.
Details the installation certificate for the alarm system.
Crucial advice and warnings for the end-user regarding installation and use.
| Brand | MED Automotive Solutions |
|---|---|
| Model | 3200 |
| Category | Security System |
| Language | English |
Loading...