If you have acquired a significant quantity of Heat Detectors, then it is recommended that spares are also
made available, (please discuss your requirements with MEDC’s Technical Sales Engineers).
5.0 CERTIFICATION
Certified to EN60079-0:2006, EN60079-1:2004, EN62141-0:2006, EN61241-1:2004
Exd IIC tD A21 IP6X T85°C (Tamb = -20°C to +55°C).
ATEX Certificate Number: Baseefa 08ATEX0320
The ATEX certificate and the product label carry the ATEX group and category marking:
II 2GD
Where:
signifies compliance with ATEX
II signifies suitability for use in surface industries
2 signifies suitability for use in a zone 1 area
G signifies suitability for use in the presence of gases
D signifies suitability for use in the presence of dust
A21 signifies suitability for use in the presence of dust in a zone 21 area
The product label also carries the following mark:
This signifies unit compliance to the relevant European directives, in this case 94/9/EC, along with the
number of the notified body issuing the EC type examination certificate.
© MEDC 2003 11/08
To Next Page
Loading...