Medela Supplemental Nursing System Step-By-Step Guide

Supplemental Nursing System
™
(SNS
™
)
Step by step guide on how to clean,
assemble and use your SNS
How to clean your SNS
Further clean the container,
TwistLok
®
lid, valve and lid
with either boiling water, in the
dishwasher or with Medela
Quick Clean
TM
bags.
To clean with boiling water,
cover the container, TwistLok lid,
valve and lid with water and boil
for five minutes.
To clean in the dishwasher, place
the container, TwistLok lid, valve
and lid on the top rack or in the
cutlery section.
To clean the container,
TwistLok lid, valve and lid
in the microwave, use the
Medela Quick Clean
TM
bags in
accordance with the instructions
on the bag.
After cleaning, dry all parts with
a clean cloth or leave to dry on a
clean cloth.
Store the clean parts in a clean
place. Do not store parts in an
airtight container or bag.
x3
x3
5 mins
or or
Container
Valve Clamp
Lid
Ring Clip
Tube
TwistLok Lid Cleaning Aid
20
o
C
30
o
C
20
o
C
Before first use and after each use
Before first use and once a day
Drying and Storage Your SNS system
Rinse all parts with
cold water
(approx. 20°C/68°F).
Clean all parts with
plenty of warm,
soapy water (approx.
30 °C /86°F).
Rinse all parts again
with
cold water
(approx. 20°C/68°F).
Fill the cleaning aid
with warm, soapy
water and flush the
tube 3 times.
Finally, flush the
tube with air until
the inside is
visibly dry.
Flush the tube
again 3 times with
clean water.

Medela Supplemental Nursing System Specifications

General

Product Type	Supplemental Nursing System
Brand	Medela
Capacity	150 ml
Tubing Material	Silicone
Adjustable Flow Rate	Yes
Reusable	Yes
Purpose	To supplement breastfeeding
Components	Container, tubing
Material	Plastic
Sterilization	Can be sterilized