Why does the thread keep breaking on my Medion MD 19077 Sewing Machine?
The thread may be breaking on your Medion Sewing Machine because the yarn has not been threaded correctly, the thread tension is too high, or the needle is inserted incorrectly. Try re-threading the yarn, adjusting the thread tension, or re-inserting the needle correctly.
What to do if my Medion MD 19077 is missing stitches?
If your Medion Sewing Machine is missing stitches, it could be due to several reasons. The needles may be bent, blunt, or damaged, or they might be inserted incorrectly. The yarn might not be threaded correctly, or the wrong type of needle may be inserted. Try inserting a new needle, ensuring the needles are correctly inserted, re-threading the yarn, or using the correct needles (type 2022).
How to prevent needles from breaking on my Medion MD 19077 Sewing Machine?
Needles break on your Medion Sewing Machine for a few reasons. The needles may be bent, blunt, or damaged. Also, the needles may be inserted incorrectly. You might also be pulling the fabric too roughly. To resolve this, insert a new needle, correctly insert the needles in the needle bar, and gently guide the fabric using both hands.
Why are the seams puckering when I sew with my Medion MD 19077?
Seams pucker when sewing with your Medion Sewing Machine due to several reasons. The thread tension might be too high, the yarn may not be threaded correctly, the yarn could be stuck, or the fabric feed has not been adjusted. Try adjusting the thread tension, threading the yarn correctly, checking the flow of the individual threads, or setting the feed to 1–2.
How to fix uneven stitching on my Medion MD 19077?
Uneven stitching on your Medion Sewing Machine can be caused by incorrect thread tension or thread sticking. To fix this, adjust the thread tension and check the flow of the individual threads.
What to do if the edge of the fabric puckers when using my Medion Sewing Machine?
If the edge of the fabric puckers when using your Medion Sewing Machine, it may be because the fabric feed has not been adjusted, or there is too much fabric in one stitch. Try setting the feed to 0.7–1 or adjusting the cut width.
Why is my Medion MD 19077 not cutting fabric cleanly?
If your Medion Sewing Machine is not cutting fabric cleanly, the upper knife might be blunt or inserted incorrectly. Try replacing the knife or inserting it correctly.
General| Brand | Medion |
|---|---|
| Model | MD 19077 |
| Category | Sewing Machine |
| Buttonhole Function | Yes |
| Automatic Needle Threader | Yes |
| Drop Feed | Yes |
| Free Arm | Yes |
| LED Lighting | Yes |
| Speed Control | Yes |
| Type | Electronic |
| Stitch Options | Decorative |
Explains warning symbols and their meanings for hazard communication.
Details correct and incorrect usage of the appliance to ensure safety and performance.
States that the product complies with relevant European Union directives and standards.
Advises on supervising children and keeping them away from the appliance and its power cable.
Provides essential safety guidelines for connecting and using the power supply and mains cable.
Warns against attempting self-repairs and advises contacting authorized service for faults.
Offers general safety advice, including avoiding water, unattended operation, and outdoor use.
Instructions on stable placement, keeping air vents clear, and careful operation of moving parts.
Guidelines for safe cleaning with a dry cloth and proper storage to protect from dust.
Lists and identifies all included accessories and where to find them.
Step-by-step guide on extending and positioning the telescopic thread guide for threading.
Explains how to use the spool holder for different spool types and sizes.
Details the use of spool caps to ensure domestic spool stability during operation.
Advises on using the spool net for specific yarn types to ensure uniform thread feeding.
Instructions on how to connect the foot control to the sewing machine and power.
Explains how sewing speed is adjusted by varying pressure on the foot control.
Describes the machine's safety switch that stops operation when the front flap is open.
Instructs on the correct direction to turn the handwheel for operation.
Details how to use the lever to raise or lower the presser foot for sewing.
Explains how to use the integrated thread cutter to trim threads after sewing.
Guides on detaching the work table to use the free arm and access the accessory compartment.
Provides the correct order and general guidance for threading the machine's loopers and needles.
Step-by-step instructions for threading the upper looper of the overlock machine.
Step-by-step instructions for threading the lower looper of the overlock machine.
Detailed instructions for threading the right needle of the overlock machine.
Detailed instructions for threading the left needle of the overlock machine.
Explains how to form a thread chain and cut threads after completing a test run.
Guides on how to adjust thread tension specifically for the needle threads to achieve balanced stitches.
Guides on adjusting thread tension for looper threads to complement needle threads.
Describes the function of the integrated handle for transporting the sewing machine.
Explains how to adjust the stitch length control for different sewing applications and fabric types.
Details how to adjust the cutting width for various seams and fabric edges.
Illustrates and describes the visual characteristics of an ideally set cutting width for overlock stitches.
Explains how to correct a cutting width that is too narrow, preventing fabric puckering.
Guides on how to adjust a cutting width that is too wide, preventing fabric curling.
Instructions for converting the machine to a two-thread overlock stitch using the provided converter.
Explains the dual feed dog system and how differential feed prevents fabric distortion.
Describes how positive differential feed gathers fabric to prevent wavy seams on knit materials.
Explains how negative differential feed stretches fabric to prevent puckering on lightweight materials.
Provides a table and instructions for setting the differential feed control based on the desired sewing outcome.
Step-by-step guide for replacing a blunt lower knife on the overlock machine.
Step-by-step guide for replacing a blunt upper knife on the overlock machine.
To Next Page
