Need help?Do you have a question about the Medline MDS86800XWC and is the answer not in the manual?
General| Product Name | Medline MDS86800XWC |
|---|---|
| Category | Mobility Aid |
| Weight Capacity | 300 lbs |
| Seat Width | 18 inches |
| Seat Depth | 16 inches |
| Overall Length | 36 inches |
| Frame Material | Steel |
| Footrest Type | Swing-away |
| Upholstery | Nylon |
| Handle Height | 36 inches |
| Color | Blue |
| Foldable | Yes |
| Product Type | Wheelchair |
| Wheel Size | 8 inch |
| Armrest Type | Fixed |
| Brakes | Push to Lock |
| Storage | Under Seat Storage |
Lists and describes the components included with the rollator, labeled A through J.
Identifies the specific rollator model this guide applies to, including item number and specifications.
Remove components from carton and unfold the rollator frame until fully extended.
Squeeze push buttons and slide wheels fully into slots, ensuring rear brake shoe is outside.
Screw on three-point knobs to fully engage push buttons for all wheels.
Insert brake handle assemblies into the frame and set to desired height, ensuring cables are on the outside.
Screw on three-point knobs to recess screw heads into the frame for both assemblies.
Insert backrest securely and loop cloth hooks for the under bag onto the seat frame.
Secure side release buckle to backrest and lower front frame for complete attachment.
Attach the frame clip to the backrest and insert the cup holder through the clip.
Screw on the cup holder knob to secure the cup holder in place.
This product contains a chemical known to the State of California to cause cancer.
To Next Page
