Mee-go Milano+ User Manual

Dear Customer,
Thank you for purchasing the Milano+ travel system.
For the safety of you child, you must read and follow these instructions
carefully.
This product has been manufactured under quality surveillance and been
tested to EN1888-2:2018 and BS EN1466:2014.
IMPORTANT- READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

Mee-go Milano+ Specifications

General

Brand	Mee-go
Model	Milano+
Category	Stroller
Language	English

Summary

Stroller Frame Operations

Unfolding and Folding the Stroller Frame

Instructions for unfolding the stroller frame by pulling the handle upwards until the locking mechanism engages.

Wheel Assembly and Operation

Fitting and Removal of Rear Wheels

How to attach and detach rear wheels by pressing the metal button in the centre of the wheel.

Fitting and Removal of Front Wheels

How to install front wheels by sliding the pin into the socket, and remove by pressing a button.

Braking and Suspension

Applying the Brake

Apply the rear wheel brake by stepping on the pedal; lift pedal to release. Always apply when stationary.

Carrycot Features

Carrycot Assembly and Disassembly

Mount carrycot by inserting connectors into frame slots and pushing down until click. Remove by pressing side buttons.

Seat Unit Operations

Seat Unit Assembly and Disassembly

Mount seat by inserting connectors into frame slots and pushing down until click. Remove by pressing side buttons.

Seat Components

Bumper Bar Installation and Removal

Safety Harness Operation

Fasten 5-point harness by pushing buckles into housing and tightening straps. Unfasten by pressing central button.

Folding and Car Seat Installation

Folding Frame with Seat Unit

Fold frame with seat in forward position: fold footrest, handle, backrest, then frame.

Car Seat Installation

Mount car seat by plugging adapters into frame slots, then aligning car seat with adapters.

Maintenance and Safety

Maintenance Instructions

General Attention Points