EasyManua.ls Logo

MegaChef MC-1400 - Preventing Radio Interferences; Electrical Connection

MegaChef MC-1400
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MC-1400| INDUCTION COOKTOP|9
PREVENTING RADIO INTERFERENCES
ELECTRICAL CONNECTION
The cooktop can cause interference with radios, televisions
and similar appliances. Interferences can be removed or
reduced by using the following measures:
Place radios, televisions and similar appliances as far away
from the cooktop as possible.
Connect the appliance to a different socket, so different
electric circuits are being used for the appliance and the
receiver experiencing interference.
Use a correctly installed aerial for your receiver in order to
ensure good reception (if applicable).
Ensure that the voltage and frequency data on the
induction cooktop rating plate (at the bottom of the
appliance) matches that of the wall outlet. If in doubt,
consult a qualified electrician.
To reduce the risk of fire, the use of a multi-plug outlet
adapter is not recommended.
Inspect the power cord for damage and ensure it doesn’t
run under the appliance or over hot or sharp surfaces.
The electrical safety of the appliance is only guaranteed
if it is connected to a properly installed fused system. The
use of the appliance without a fuse is prohibited. If in
doubt, consult a qualified electrician. MegaChef cannot
be made responsible for damages due to a missing or
damaged protective conductor.
Ensure to always use a grounded wall socket to connect
the appliance.

Related product manuals