THE IMMERSION BLENDER| MC-158C | 13
5. Align the chopper lid dips to the main body release
button. Push the downward until it clicks. The chopper
lid is now securely attached to the main body (Fig. 3).
FIG 3
DETACHING THE CHOPPER
1. To detach the chopper, press the release buttons on
both sides of the main body
2. Pull the main body upwards.
1. Once the main body is attached to the chopper,
plug the appliance to a power outlet.
2. Using the adjustable speed knob, set the blender to
the desired speed.
3. Hold down the start button to start blending. The
blending will stop operation once the start button
has been released.
OPERATING THE CHOPPER
To Next Page
Loading...