MegaTech nirvana - Assembling the Nirvana; Attaching the Keel; Attaching the Rudder

5)Take bottom mast and boom section and insert
mast into pocket of main sail.
Carefully put upper section and lower section
together, making sure that the gooseneck is point
-
ing back and the jib hoist is pointing forward. Slide
boom through loop 1 and then slide O-ring 2 onto
boom and place hook 3 in the hole bottom of
boom. (See fig. 1 for finished view.) Fit E to E
6)Hook jib to jib
hoist. Fit F to F
Jib sail
F
Hook 3
Loop 1
“O” Ring 2
Fig 1
Jib hoist
Main sail
Mast and boom set
E
E
F
Loop 1
“O” Ring 2
Hook 3
Boom