Basic functions
S1/S2
mode
S2
S2 mode is namely”pre-flash cancel mode”.It is similar
to S1 mode,But it can ignored the pre-flash given by TTL
flash.Therefore,it can support the main flash working in
TTL mode.In particular,if S1 mode can not flash correctly
and synchronically with your internal flash,you can try the
S2 mode.(The function is suitable for the cameras of
CANON and NIKON)
S2 preflash can through the“ ” “ ”to adjust exposure
brightness
-18-
2
!
1. Whatever mode your flash,press the button for more than 1 second, then
you can reset the parameter of the flash by fast-forward or fast-backward.
2. All parameters can by seted recycling,except for manual set the zoom function.
“ ” “ ”
To Next Page
Loading...