Basic functions
At first continue to press <SET> button, then put batteries into speedlite, you can see
manufacture data.
16. Overheating proteciton
If the flash light is used too frequently, its overheating protection funciton will be trigge-
red, the red and green lights of the charging indicator will blink alternatively, and the
flash light will be locked. in such ca
se, wait indicator to be green then cancel the prote-
cti
on before continuing the use.
* Please try to use the 1/4 output or lower when rapid shooting is needed to prevent
the effect on the shooting.
15. Recover factory settings data
-21-
To Next Page
Loading...