10
WARRANTY: 2 years
The warranty ceases to be valid if the product is tampered with or
used incorrectly.
Remote control model Mycro
Purchase date
Agent's stamp
PROBLEM
The TV does not respond
and the light indicator does
not light up when you press
a key.
The TV or VCR does not
respond but the light
indicator does light up.
The TV does not respond
and the light indicator
flashes.
Not all remote control
commands are working
correcting.
The and keys do not
select the programmes.
TROUBLESHOOTING
SOLUTION
Check that the battery is fitted
correctly. If necessary, replace
it with a new CR2032 lithium
battery.
Check that the battery is new
and that the remote control is
pointing at the appliance without
any obstacles in the way. If
required, reset the remote
control code by repeating the
programming procedure.
Battery low. Replace it.
You may have used the wrong
code. Reset the remote control
code, following the programming
procedure.
The original remote control may
not have had this function. In
this case, set the code (press
9 times) as described in the
PROGRAMMING YOUR
REMOTE CONTROL section
above.
If you have any queries about Mycro:
• read this booklet carefully – this will help you to solve
almost all problems
• consult our Internet site www.meliconi.com to answer all
your queries more easily and quickly.
INFO-LINE
To Previous Page
Loading...
