Melitta Avanza F270-100 - Setting Coffee Quantity; Preparing a Coffee Beverage; Stopping Coffee Preparation; Preparing Two Coffees

Preparing beverages
42
GB
You can adjust the coee strength by
pressing the "Coee strength" button one
or more times.
You can adjust the coee strength before
the beverage is dispensed or during the
grinding process.
Information
When switching o the appliance, the last
set coee strength is stored.
5.2 Setting the coee
quantity
19
Fig. 12: Setting the coee quantity
You can set the coee quantity with the
"Coee quantity"(19) rotary regulator.
You can adjust the coee quantity before
the beverage is dispensed or during the
grinding process.
Coee quantities are continuously adjusta-
ble between 25ml and 220ml.
5.3 Preparing the coee
beverage
Requirement: The appliance is ready for
operation.
1. Place a vessel beneath the outlet.
2. Press the "Coee" direct key.
» The grinding process and beverage
dispensing start.
» Beverage dispensing ends automat-
ically.
3. Remove the vessel.
5.4 Stopping coee
preparation
If you want to stop the preparation of a
coee beverage prematurely, press the
direct key again.
5.5 Preparing two coee
beverages simultaneously
You can prepare two coee drinks simul-
taneously with the "2cups" button. For
two-cup dispensing, the appliance carries
out two grinding processes.
28
Fig. 13: Two-cup dispensing
1. Place two vessels beneath the outlet.
2. Press the"2cups" button(28).
» The 2 cups display lights up.
3. Press the "Coee" direct key.
» The grinding process and beverage
dispensing start.
» Beverage dispensing ends automat-
ically.
4. Remove both vessels.
Information
 The setting only applies to the single
beverage that is prepared.