Melitta Caffeo Barista TS - Using the Control Panel Interface

Basic operation
65
ENGLISH
Information
ū The appliance switches o automatically when it is not operated for a
long time. Automatic rinsing is also carried out in this case.
ū The o time can be set in the Auto OFF menu, see chapter8.4 Setting
Auto OFF on page85.
ū If no beverage has been prepared since switching on or if the water tank
is empty, no rinsing takes place.
4.2 Using the control panel
The essential functions can be accessed using the control panel.
Press the button with a ngertip. The control panel does not react when
touched with a pen or other objects.
Only those buttons that can be used in the appliance's current status light
up.
Use the following actions to operate the control panel:
Brief press
Briey press a button to select a function.
Long press
Press a button for longer than 2 seconds to select a second
function that may be available.
Press "+" or "–"
Press "+" or "–" to increase or reduce the current value.
Hold a button down to change the value continuously.
Press the slider
Press the slider to select a value.
Pull the slider
Press and pull the slider to increase or reduce the current
value.