Melitta Caffeo Barista TS - Emptying Drip Tray and Grounds Container

Basic operation
72
ENGLISH
Connecting the milk hose (depending on the model)
14
6
38
36
Fig. 13: Connecting the milk hose to the appliance
1. Push down the outlet (6).
2. Connect the milk hose(36) to the connection at the outlet(14).
3. Insert the milk hose into a conventional milk pack(38).
4.9 Emptying the drip tray and coee grounds container
When the drip tray(8) and the coee grounds container(7) are full, the
appliance requests you to empty them. The projecting oat(17) also indi-
cates that the drip tray is full. Always empty both containers.
7
17
8
Fig. 14: Drip tray, coee grounds container and oat
1. Pull the drip tray(8) forwards out of the appliance.
2. Remove the coee grounds container(7) and empty it.
3. Empty the drip tray.
4. Insert the coee grounds container.
5. Push the drip tray into the appliance up to the stop.