Melitta Caffeo Barista TS - Stopping Beverage Preparation

Preparing beverages
77
ENGLISH
 Before selecting a beverage, select a bean type with the "BEANSELECT"
button.
 Before selecting a beverage, use the "Beverage amount" slider to set a
beverage amount.
 Before selecting a beverage, use the "Coee strength" slider to set the
coee strength.
Information
ū When preparing Latte Macchiato and Cappuccino, the total beverage
amount is subdivided into a coee and a milk amount according to a
specied ratio.
ū If a beverage is not prepared within 1 minute, the appliance switches to
the default settings.
Changing beverage settings during preparation
The beverage amount and the coee strength can be changed during
beverage preparation.
 During beverage dispensing (coee or milk), use the "Beverage amount"
slider to set the relevant beverage amount.
 During the grinding process, use the "Coee strength" slider to set the
coee strength.
5.8 Stopping beverage preparation
To stop beverage preparation prematurely, press the selected direct key
again.