EasyManua.ls Logo

Melitta Caffeo Barista TS - Changing Default Beverage Settings

Melitta Caffeo Barista TS
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Permanently changing beverage settings
79
ENGLISH
ū Cappuccino: Cappuccino (Standard), Espresso Macchiato, Caè Latte,
Café au Lait, Flat White.
ū Latte Macchiato: Latte Macchiato (Standard), Latte Macchiato Extra Shot,
Latte Macchiato Triple Shot.
Recipe selection is similar for all beverages. The selection of a Ristretto is
described as an example here.
Direct keys
Espresso
Recipes
Exit
Espresso
Ristretto
Lungo
Double Espresso
Double Ristretto
Fig. 17: Recipe selection for Ristretto
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Direct keys > Espresso > Recipes menu.
3. Use the arrow buttons to select Ristretto and conrm with
"menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
» The next time an Espresso is prepared, the Ristretto recipe will be used.
Information
ū The recipe selection remains valid until it is changed again.
ū Recipes can also be selected directly with the "My Coee/Recipes" but-
ton (see chapter5.6 Preparing beverages with recipes on page75).
6.2 Changing default settings
Depending on the beverage, the following default settings can be changed:
ū Coee amount: Amount in millilitres
ū Foam amount: Amount in millilitres
ū Milk amount: Amount in millilitres
ū Hot water amount: Amount in millilitres
ū Beans: Bean chamber 1 or 2
ū Coee strength: Very mild, mild, normal, strong, very strong
ū Temperature: Low, normal, high

Table of Contents

Related product manuals