Melitta Caffeo Barista TS - Auto Bean Select Activation;Deactivation; Setting the Auto OFF Timer

Changing basic settings
85
ENGLISH
8.3 Activating/Deactivating Auto BeanSelect
Automatic selection of a bean type can be activated/deactivated.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the System > Automatic BeanSelect menu.
3. Use the arrow buttons to select Enabled or Disabled and conrm with
"menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
8.4 Setting Auto OFF
If the appliance is not operated for a long time, it switches o automatically
after a specied time. Set the duration until the appliance switches o in
the Auto OFF menu. A specic point in time can also be dened.
Information
If the duration and point in time are activated simultaneously, the appliance
switches o after the event that occurs rst.
Setting the duration for Auto OFF
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Auto OFF > OFF after... menu.
3. Use the arrow buttons to select a time and conrm with "menu/ok".
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
Information
Auto OFF cannot be deactivated completely. After 8 hours without being
operated at the latest, the appliance switches o.