Melitta Caffeo Barista TS - Setting Energy Save Mode

Changing basic settings
86
ENGLISH
Setting the point in time for Auto OFF
The OFF time point is deactivated as default in the factory.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Auto OFF > OFF at... menu.
3. Use the arrow buttons to select the hours and minutes. Conrm each
setting with "menu/ok"
4. Repeatedly select the Exit command to exit the menu.
» The ready symbol appears on the display.
Information
To deactivate Auto OFF, set the OFF time point to 00:00.
8.5 Setting energy save mode
Energy save mode lowers the heating temperature and switches o the
illumination on the control panel. The "menu/ok" button remains lit.
If the appliance is not operated for a long time, it automatically switches
to energy save mode after a specied time. The period of time until energy
save mode is activated is set in the Energy save mode menu.
Requirement: The ready symbol appears on the display.
1. Press the "menu/ok" button for 2 seconds.
» The menu appears on the display.
2. Navigate to the Energy save mode menu.
3. Use the arrow buttons to select a period of time and conrm with
"menu/ok".
4. Exit the menu with the Exit command.
» The ready symbol appears on the display.
Information
ū Energy save mode is ended by pressing the "menu/ok" button.
ū Energy save mode cannot be deactivated completely. After 4 hours
without being operated at the latest, the appliance switches to energy
save mode.