Melitta Caffeo Lattea F300-100 - Appliance Power Management; Turning the Appliance On; Turning the Appliance Off

52
5 Switching on and off
5.1 Switching on the appliance
Note
The appliance performs an automatic rinse every time it is switched on.
• Place a vessel below the outlet.
• Press the ON/OFF button to switch the appliance on.
→ The standby symbol is ashing. The appliance heats up.
The appliance performs an automatic rinse and hot water ows out of the
outlet. The standby symbol will then be illuminated.
The appliance is ready for operation.
5.2 Switching off the appliance
• Place a vessel below the outlet.
• Press the ON/OFF button to switch off the appliance.
→ The appliance automatically rinses out the coffee channels once coffee has
been dispensed. The brewing chamber goes into the resting position.
The standby symbol is not illuminated.
Heft_Lattea_EU_2_3.indd 52 09.04.2014 14:04:18