ENGLISH
55
7 Preparing espresso or café crème
7.1 Preparing one cup of espresso or café crème
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 52).
• Place a suitable vessel under the outlet.
• Press the button for coffee strength to adjust the coffee strength.
• Turn the coffee quantity regulator (Fig. A, no. 4) to adjust the dispensed
quantity.
• Press the button for one-cup dispensing .
→ The grinding process and coffee dispensing now start. The standby symbol
is ashing. Dispensing ends automatically when the set dispensed
quantity is reached.
• To interrupt coffee dispensing, press the button for one-cup dispensing
.
Notes
– When the appliance is started up for the rst time, the grinder will grind
longer than usual.
– You can also adjust the dispensed quantity during the dispensing process.
To dispense less coffee, turn the coffee quantity regulator to the left to
the desired quantity, or turn it until the appliance stops dispensing. To
dispense more coffee, turn the regulator to the right.
Heft_Lattea_EU_2_3.indd 55 09.04.2014 14:04:19
To Next Page
Loading...
