60
• Press the ON/OFF button to conrm the selected water hardness.
→ All symbols on the display ash briey as conrmation. The appliance is
ready for operation, the standby symbol is illuminated.
Note
During the adjusting process, if you do not press a button within 60 seconds
the appliance automatically reverts to standby mode.
10.2 Energy-saving mode
After the last action, the appliance automatically (depending on the settings)
switches to energy-saving mode (the appliance thus consumes much less energy
than in standby mode). You can set different times for the energy-saving mode. The
appliance is factory-set at 5 minutes .
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 52).
Please adjust the timer as follows:
• Simultaneously press the button for one-cup dispensing and the
button for two-cup dispensing for more than 2 seconds.
→ The standby symbol is ashing rapidly.
• Press button for one-cup dispensing twice to call up the menu for
the energy-saving mode.
→ The symbol for the water tank illuminates.
• Press the brewing coffee button several times to select from four
possible times for the timer.
Heft_Lattea_EU_2_3.indd 60 09.04.2014 14:04:20
To Next Page
Loading...
