Melitta Caffeo Lattea F300-100 - Auto-OFF Timer Settings

ENGLISH
61
Display Time
5 minutes
(factory setting)
15 minutes
30 minutes
ashing
off
• Press the ON/OFF button to conrm the selected time.
→ All symbols in the display ash briey for conrmation. The appliance is
ready for operation, the standby symbol is illuminated.
Note
You can wake up the appliance from the energy-saving mode by pressing on
the button for coffee strength . You can then immediately dispense coffee.
10.3 Auto-OFF function
The device switches off automatically after the last action (depending on the
setting). You can set different times for the auto-OFF function. The appliance is
factory-set at 30 minutes .
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 52).
Please adjust the timer as follows:
• Simultaneously press the button for one-cup dispensing and the
button for two-cup dispensing for more than 2 seconds.
→ The standby symbol is ashing.
• Press the button for one-cup dispensing three times to call up the
menu for the Auto-OFF function.
→ The symbol for the drip tray is illuminated.
Heft_Lattea_EU_2_3.indd 61 09.04.2014 14:04:20