62
→ Press the coffee strength button several times to select from four
possible times for the timer.
Display Time
30 minutes
(factory setting)
2 hours
4 hours
ashing
8 hours
• Press the ON/OFF button to conrm the selected time.
→ All symbols in the display ash briey as conrmation. The appliance is
ready for operation, the standby symbol is illuminated.
10.4 Brewing temperature
The brewing temperature is factory-set at level 2 (medium ).
Prerequisite: The appliance must be ready for operation (see „Switching on
and off“ on page 52).
Adjust the brewing temperature as follows to meet your requirements:
• Simultaneously press the button for one-cup dispensing and the
button for two-cup dispensing for more than 2 seconds.
→ The standby symbol is ashing.
• Press the button for one-cup dispensing four times to call the
menu for brewing temperature.
→ The symbol for cleaning ashes.
• Press the button for coffee strength to select between the three
possible brewing temperatures.
Heft_Lattea_EU_2_3.indd 62 09.04.2014 14:04:21
To Next Page
Loading...
