64
10.6 Grinding neness
The grinding neness level was optimally adjusted prior to delivery. Consequently,
we recommend that you only readjust grinding neness after dispensing
approximately 1,000 coffees (about 1 year).
You can only set the grinding neness while the mill is running. Thus, adjust
grinding neness directly after coffee dispensing starts.
If the coffee avour is not sufciently intense, then we recommend that you set a
ner grinding level.
• Reach into the recess on the right side of the appliance (Fig. A, no. 14)
and pull off the cover to the right.
• Start a normal coffee dispensing process.
• While the grinder is running: Place the lever in one of the three
positions (Fig. E).
• Insert the four catches of the cover into the back of the appliance and
swing the cover to the left until it locks into place.
Lever position Grinding neness
Left Fine
Centre Medium
Right Coarse
(factory setting)
Heft_Lattea_EU_2_3.indd 64 09.04.2014 14:04:22
To Next Page
Loading...
