What to do if cleaning or descaling process was interrupted on Melitta Caffeo Solo Coffee Maker?
If the cleaning or descaling process on your Melitta Coffee Maker was interrupted, possibly due to a power outage, the appliance will automatically perform a rinsing program. Follow the instructions displayed on the appliance to complete this process.
How to fix a Melitta Caffeo Solo when the grinder is not grinding?
If the grinder isn't grinding, start by tapping lightly on the bean container to help the beans fall into the grinder. If that doesn't work, there might be foreign objects in the grinder, in that case you should call the hotline.
What to do if Melitta Caffeo Solo cleaning or descaling process was interrupted?
If the cleaning or descaling process was interrupted, likely due to a power outage, the appliance will automatically perform a rinsing program. Follow the instructions displayed on the appliance to complete this process.
Why does coffee only flow drop-by-drop from my Melitta Coffee Maker?
If your coffee is only dispensing drop-by-drop, it could be because the grinding fineness is too fine. Adjust the grinding fineness to a coarser setting. Additionally, try cleaning the brewing unit and perform a descaling or cleaning program if necessary.
What to do if the brewing unit of my Melitta Caffeo Solo can't be reinserted?
If you're having trouble reinserting the brewing unit, first check that the handle for locking the brewing unit is correctly engaged. If it still doesn't fit, switch the appliance off and then on again. Press the buttons for single- and two-cup dispensing simultaneously for longer than 2 seconds to put the actuator into the correct position. Then, reinsert the brewing unit and ensure it's correctly locked into place.
Why are the bean symbols flashing on my Melitta Caffeo Solo Coffee Maker when the container is full?
If the bean symbols are flashing even when the container is full, it indicates there might be an insufficient quantity of ground beans in the brewing chamber. Try pressing the buttons for single-cup dispensing or two-cup dispensing.
What does it mean when the cleaning and stand-by symbols flash alternately on my Melitta Coffee Maker?
If the cleaning and stand-by symbols are flashing alternately, it could mean that the brewing unit is missing or not properly inserted; make sure to insert it correctly. Another cause may be that the brewing chamber is overfilled. To fix this, switch off the appliance and switch it on again using the ON/OFF button (repeat if necessary) until standby mode is displayed.
Why is my Melitta Caffeo Solo grinder making a loud noise?
If the grinder is making a loud noise, there could be foreign objects inside. In that case you should call the hotline.
What does continuous flashing of all buttons on Melitta Caffeo Solo Coffee Maker mean?
If all the buttons are flashing continuously, it indicates a system error. Try switching the appliance off and then on again using the ON/OFF button. If the problem persists, send the appliance to the service department.
What to do if brewing unit won't reinsert in my Melitta Coffee Maker?
If you can't reinsert the brewing unit into your Melitta Coffee Maker, first check that the handle for locking the brewing unit is correctly engaged. If that's not the issue, the actuator might not be in the proper position. Switch the appliance off and on again, then press the single- and two-cup dispensing buttons simultaneously for longer than 2 seconds to put the actuator into position. Then, reinsert the brewing unit, ensuring it's correctly locked into place.
General| Product type | Espresso machine |
|---|---|
| Self-cleaning | Yes |
| Capacity in cups | 2 cups |
| Coffee input type | Coffee beans |
| Appliance placement | Built-in |
| Type | Coffee/Espresso |
| Product color | Black |
| Built-in display | No |
Weight and Dimensions| Depth | 455 mm |
|---|---|
| Width | 200 mm |
| Height | 325 mm |
Explains the meaning and use of symbols indicating warnings, cautions, and notes within the manual.
Defines the appliance's purpose and the conditions under which it should be operated for optimal and safe performance.
Outlines uses that deviate from the manual's instructions, highlighting potential risks and manufacturer liability.
Identifies and explains each numbered component of the appliance as depicted in Figure A for user reference.
Details the various symbols shown on the appliance's display and their corresponding meanings or prompts.
Instructions on positioning the appliance on a stable, level surface, ensuring adequate clearance from walls and objects.
Guidance on plugging the appliance's power cable into a suitable and safe electrical socket.
Steps for opening the lid and filling the bean container with fresh coffee beans only.
Instructions on how to remove, fill the water tank to the maximum mark, and reinsert it.
Procedure for the initial power-on, including system venting and ready indication.
How to use the coffee quantity regulator to set the desired amount of coffee dispensed per cup.
Method for selecting different coffee strengths by pressing the dedicated button, indicated by bean symbols.
Steps to power on the appliance, including automatic rinsing and heating indications.
Steps to power off the appliance, including automatic rinsing of the coffee channel.
Detailed instructions for brewing a single serving of espresso or café crème.
Detailed instructions for brewing two servings of espresso or café crème simultaneously.
Procedure to adjust the water hardness setting based on local water conditions for optimal appliance performance.
How to configure the timer settings for the appliance to enter energy-saving mode.
How to set the duration before the appliance automatically switches off after the last use.
Instructions on adjusting the brewing temperature to three different levels: low, medium, or high.
Steps to restore all appliance settings back to their original factory defaults.
Guide on how to adjust the fineness of the coffee grind for optimal flavour extraction.
Routine cleaning procedures for the appliance's exterior, drip tray, and coffee grounds container.
Detailed steps for removing, cleaning under running water, and reinserting the brewing unit.
Instructions for running the automated cleaning cycle to remove coffee oil residues.
Steps for running the automated descaling cycle to remove limescale build-up.
Procedures for venting the appliance and preparing it for storage or transport to prevent damage.
To Next Page
