5 minutes
(factory setting)
15 minutes
30 minutes
Flashing
OFF
Press the on/off button • to confirm the selected time.
All symbols in the display flash briefly for confirmation. The appliance is →
ready for operation, the standby symbol is illuminated.
Note
Press the brewing strength button to wake the machine from energy-
saving standby mode. You can then immediately dispense coffee.
Setting the timer for the auto-off function
Additional information on auto-off function is provided on page 62. The timer is
factory-set to level 1 (1 hour).
Prerequisite: The appliance is ready for operation, the standby symbol
is illuminated.
Adjust the timer as follows:
Simultaneously press the button for coffee dispensing • and the but-
ton for brewing strength for more than 2 seconds.
The standby symbol → is flashing.
Press the button for coffee dispensing • three times to call up the
menu for the Auto-Off function.
The symbol for the drip tray → is illuminated.
To Next Page
Loading...
