Melitta CaffeO Solo&milk - Resetting to factory settings; Overview of factory settings

ENGLISH
67
Display Brewing temperature
low
medium
(factory setting)
high
Press the on/off button • to confirm the selected brewing temperature.
All symbols in the display flash briefly for confirmation. The appliance is →
ready for operation, the standby symbol
is illuminated.
Resetting to factory settings
To reset the device to the factory settings, execute the following points:
Prerequisite: The appliance is ready for operation, the standby symbol
is illuminated.
Simultaneously press the button for steam dispensing •
and the On/
Off button
for more than two seconds.
All settings will be reset to the factory settings. The standby symbol → will
flash briefly for confirmation.
Overview of factory settings:
Function settings Factory setting
Water hardness Water hardness 4
Energy-saving
standby mode
Level 1 (5 minutes)
Auto-off function Level 1 (1 hour)
Brewing temperature Level 2 (medium)