68
Adjusting grinding fineness
The grinding fineness level was optimally adjusted prior to delivery. Consequently, we
recommend that you only readjust grinding fineness after approximately 1,000 coffee
preparation processes (approximately 1 year).
You can only set the grinding fineness while the grinder is running. Thus, adjust
grinding fineness directly after coffee dispensing starts.
If the coffee flavour is not sufficiently intense then we recommend that you set a finer
grinding level.
Reach into the recess on the right side of the appliance (Fig. • A, no. 13) and
pull off the cover to the right.
Start a normal coffee dispensing process.•
While the grinder is running:• Place the lever in one of the three posi-
tions (Fig. E).
Insert the four catches of the cover in the back of the appliance and swing •
the cover to the left until it engages.
Lever position Grinding fineness
left finer
centre medium
right coarser
To Next Page
Loading...
