4 Basic operation
This chapter describes basic operating steps for using the appliance on a
daily basis.
4.1 Switching the appliance on and o
Before switching on after starting up the appliance for the rst time, read
section3.5 Switching on the appliance for the rst time on page58.
Information
ū When switched on and o, the appliance performs automatic rinsing.
ū During rinsing, rinsing water is also conducted into the drip tray.
Switching on the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button.(9).
» The welcome display appears on the appliance.
» The appliance heats up and performs automatic rinsing.
» The ready symbol appears on the display.
Information
If the appliance was only switched o briey, there is no automatic rinsing
after switching on.
Switching o the appliance
1. Place a vessel beneath the outlet.
2. Press the ON/OFF button (9).
» The appliance performs automatic rinsing.
» The appliance switches o.
Information
ū The appliance switches o automatically when it is not operated for a
long time. Automatic rinsing is also carried out in this case.
ū The o time can be set in the Auto OFF menu, see section 8.2 Setting
Auto OFF on page78.
ū If no beverage has been prepared since switching on or if the water tank
is empty, no rinsing takes place.
To Next Page
Loading...
Need help?
General
