Melitta Cafina XT5 - Switching off

5�3�3 Switching off
Note
For hygiene reasons, the machine must be
switched off only in a cleaned state.
Always use the “Clean and switch off full
system” function. The “Switch off” function
(in the manager menu) is permitted to be used
only if a cleaning process of the full system has
been carried out and no further products have
been dispensed.
When switching off, the machine goes into stand-by
mode.
000289
Next cleaning today
Time
in
Clean
full system
Cleaning
Information: Once cleaning has started, it cannot be canceled!
Clean and switch off
full system
Clean touch screen
Rinse mixer
2
1
Fig. 6: Switching off the machine
1. On the display, press the menu symbol “≡“(1) and
then “Cleaning”.
͵ In self-service operation, you must first log in with
a user chip key (see chapter5.1.4 on page10).
2. Press the “Clean and switch off full system” button(2).
͵ The next steps are described in chapter 8.7 on
page35.
9 The cleaning program is carried out. The machine is
then switched off.
For an extended standstill
If the machine will not be used for an extended period,
turn off the water supply and switch off the main switch.
Note
For hygiene reasons, the machine must be
switched off only in a cleaned state.
If you want to take the machine out of operation, contact
customer service.
12
39663 • 20220101
Operation
5