5�4 Filling
Note
The filling level must be confirmed at the
machine each time a supply container is filled
(see chapter5.5 on page15).
5�4�1 Filling the coffee supply
There will be one or two bean containers depending on
the equipment.
21
Fig. 7: Filling the bean container
1. Remove the lid on the bean container.
2. Fill the correct beans into the corresponding bean
container, e.g., espresso beans in container1(1) and
coffee beans in container2(2).
3. Refit the lid.
9 The bean container has been filled.
To simplify filling, the relevant container can be removed.
1
2
Fig. 8: Removing the bean container
1. Remove the lid on the bean container.
2. Turn the lever(1) a ¾ turn counterclockwise.
3. Remove the bean container(2).
4. Fill the coffee beans into the bean container.
5. Refit the bean container back into the machine.
6. Turn the lever a ¾ turn clockwise back to the original
position.
7. Refit the lid.
9 The bean container has been filled.
Note
The coffee grounds drawer should also be
emptied every time the coffee supply is filled
(see chapter5.6 on page16).
Operation
13
39663 • 20220101
5