Melitta Cafina XT5 - Confirming Filling Levels

5�5 Confirming filling levels
The filling level must be confirmed at the machine each
time a supply container is filled.
000577
Fresh water canister
Filling levels
Milk container
Bean container 2Bean container 1 Instant container 1 Instant container 2
2
1
3
Fig. 12: Confirming filling levels
1. On the display, press the menu symbol “≡”(1) and
then “Filling levels”.
͵ In self-service operation, you must first log in with
a user chip key (see chapter5.1.4 on page10).
2. Press the required “T” button (3) above the filling
level displays to mark the following containers as full
(from left to right and top to bottom):
͵ Bean container1 (front)
͵ Bean container2 (rear)
͵ Instant container1 (left)
͵ Instant container2 (right)
͵ Fresh water canister
͵ Milk container
9 The filling levels have been confirmed.
To return to the start screen, proceed as follows:
• Self-service operation: On the display, press the
menu symbol “≡”(1) and then “Logout”.
• Waiter operation: On the display, press the menu
symbol “≡”(1) and then “Selection”.
You can adjust the filling levels even more accurately.
3. Press the required filling level display, e.g., of the bean
container1(2).
͵ A new window opens.
000527
Filling level Coffee
Limit value
Designation
ApplyCancel
Coffee
1
3
2
Fig. 13: Adjusting filling levels more accurately
4. Select one of the following options:
• Press the “T” button (1) to mark the container
as full.
• Touch the filling level display above or below the
bar(2) to adjust the filling level in steps.
• Slide the bar(2).
5. Press the “Apply” button(3) to adopt the settings and
return to the previous screen.
9 The filling levels have been confirmed.
If the filling level for a consumable drops below a set value,
a warning will appear on the display. If you confirm that
the consumable has been refilled, you can then adjust the
new filling level straight away in a similar dialog as shown
in Fig. 13.
Operation
15
39663 • 20220101
5