Melitta Cafina XT5 - Batch Mode

6�11 Batch mode
If this function is enabled by customer service, you can
preselect several products with the batch mode and
dispense them in sequence.
000591
Latte Macchiato
Espresso
***
Café Crème
Steam
Hot water
Ristretto
***
Cappuccino
Milk foam
warm
Café Crème
Cappuccino
**
Espresso
***
2
1
3
Fig. 25: Batch mode
Depending on the preset in the manager menu (see
chapter 7.1 on page 24), the batch mode (1) can be
open or closed by default.
To open or close the batch mode manually, press the
symbol “«” (open) or “»” (close) (3) to the right of the
lower bar.
Product dispensing in batch mode
1. With the batch mode open, press the products to be
dispensed in sequence.
2. Press the “” button(2) (see Fig. 25) on the display to
start dispensing the first product.
000528
Cappuccino
**
Espresso
***
Cappuccino
**
1
2
Fig. 26: Dispensed product in batch mode
3. Once a product has been dispensed from the batch,
remove it and position a suitable container for the
next product underneath the corresponding beverage
outlet.
4. Press the “” button (1) to continue dispensing the
products.
͵ Once all products from the batch have been dis-
pensed, the machine returns to the start screen.
You can bring forward the dispensing of a product or
multiple selection of a product from the batch so that it is
the next in the sequence:
1. Press the required product or the multiple selection
of a product in the batch.
2. Press the “” button (1) to continue dispensing the
products with the selection.
͵ Once all products from the batch have been dis-
pensed, the machine returns to the start screen.
9 The products have been dispensed and the batch
mode is finished.
Adding or removing products in batch mode
Products which are already in the batch can be added or
removed.
000529
Cappuccino
**
Espresso
***
Cappuccino
**
Pre-set batch input
2
1
Fig. 27: Product dispensing in batch mode
22
39663 • 20220101
Dispensing products
6