2. Carry out the required option:
Note
For hygiene reasons, the machine must be
switched off only in a cleaned state.
The “Switch off” function is permitted to be
used only if a cleaning process of the full system
has been carried out and no further products
have been dispensed.
Option Options
Clean touch
screen
Clean the touch screen while the
display is locked, see chapter8.12
on page40
Clean full system Clean the milk and brewing
system, then continue machine
operation, see chapter8.7 on
page35
Rinse mixer If required, rinse the mixer unit,
see chapter8.9 on page39
Clean and switch
off full system
Clean the milk and brewing
system, then switch off the
machine, see chapter5.3.3 on
page12
Lock product
selection
Lock product dispensing
temporarily, see chapter5.8 on
page17
Switch off Switch off the machine
9 The selected option is carried out.
7�6�3 Menu option “Weekly planner”
Besides viewing the weekly planner as described in
chapter 5.7 on page 16, you can configure the fully
automatic operation if enabled by customer service.
On On On On On On On
Overview
Times
Off
Mon Tues Weds Thurs Fri Sat Sun
Logout
SELECTION UNITPRODUCT OPERATION
2
3 54
1
Fig. 38: Weekly planner
1. Press the “Weekly planner” button(1).
2. Activate or deactivate a parameter for the fully
automatic operation by pressing the symbol(3).
͵ In case the preceding line is horizontal, you cannot
change the operating state of this parameter.
͵ Cleaning times cannot be deactivated.
3. Determine the base setting of the parameter with the
field next to the symbol(4).
Settings
29
39663 • 20220101
7