Parameter Base setting
Cleaning times Once per day a cleaning of the
full system is required. For the
automatic cleaning prompt on the
display either set cleaning times
(“Times”) or state the latest time
of day (“1x/ day”).
Additionally, if enabled by
customer service, set a week-
end operation. With this you
can temporarily suspend the
daily cleaning prompt (machine
components will be deactivat-
ed if necessary). The begin of
a weekend operation must be
confirmed. If required, a cleaning
will be performed.
Switching on/off Machine is principally “on” and
switch-off times are specified, or
machine is principally “off” and
switch-on times are specified.
4. Press a row(5) to set up or edit events.
Note
If you cannot confirm an event and if it is shown
in red in the timeline, the event is in conflict
with an already configured event.
9 The weekly planner has been edited.
7�7 Menu option “Operation”
Here you can read off the consumption and product
statistics and adjust settings for the machine.
7�7�1 Opening usage statistics
No.
Logout
COMPONENTS
Ground coffee quantity
grinder 1
Usage statistics
Production counter
Ground coffee quantity
grinder 2
Instant powder quantity 1
Instant powder quantity 2
SELECTION UNITPRODUCT OPERATION
1
2
Fig. 39: Usage statistics
1. Press the “Usage statistics” button (1) to open the
usage statistics for ground coffee and instant powder.
2. Press the line containing the statistics symbol (2) to
view statistics on the weight of sample and brew
duration.
͵ Select the corresponding grinder and product.
͵ You can use the filter to display statistics according
to various criteria.
9 The usage statistics are opened.
7�7�2 Opening product statistics
No. PRODUCT NAME
Espresso
***
Product statistics
Total counter
Café Crème
Cappuccino
**
Hot water
Filter Export
Total (table):
Total: 3667
SELECTION UNITPRODUCT OPERATION
Logout
3
1 2
Fig. 40: Product statistics
1. Press the “Product statistics” button(3) to see how
many times a product has been dispensed.
30
39663 • 20220101
Settings
7