Melitta Cafina XT5 - Running the Cleaning Program

8�7 Running the cleaning program
No products can be dispensed during the cleaning
process. Product dispensing can be continued only after
the cleaning program has been ended and all containers
have been refitted.
CAUTION
Danger of burns!
There is a danger of burns from hot components or due
to hot liquids.
• Do not hold any body parts underneath the beverage
outlet while the cleaning program is running or during
the rinsing processes.
• Note that the water in the drip tray may be hot.
8�7�1 Preparatory activities (option)
The preparatory activities only have to be carried out
when a milk system is present and has been used.
1. Damp-clean the milk tube coming out of the machine.
2. Clean the inside of the refrigerator (if fitted), the door,
and door seals with a conventional cleaner.
͵ Leave the door open during the entire cleaning
process. Otherwise condensation could form and
impair functioning.
Fig. 43: Cleaning container
3. Replace the milk container with the empty cleaning
container(1).
8�7�2 Starting the cleaning program
The machine cleaning program runs to the greatest
possible extent automatically.
000289
Rinse mixer
Next cleaning today
Time
in
Clean
full system
Cleaning
Information: Once cleaning has started, it cannot be canceled!
Clean and switch off
full system
Clean touch screen
1
Fig. 44: Starting the cleaning program
1. On the display, press the menu symbol “≡”(1) and
then “Cleaning”.
͵ In self-service operation, you must first log in with
a user chip key (see chapter5.1.4 on page10).
2. Select one of the following options:
Button Function
Clean full system Clean the milk and brewing
system, then continue machine
operation
Clean and switch
off full system
Clean the milk and brewing
system, then the machine
switches off
3. Clean the coffee grounds drawer as described in
chapter8.6 on page34.
If prompted to clean the instant system, clean the machine
parts of the instant system as described in chapter8.8 on
page 37 and afterwards confirm that it has been fully
reinstalled:
4. First confirm “Cleaning the instant system” and then
“Instant system fully installed?” with the “OK” button.
Cleaning
35
39663 • 20220101
8