Melitta CI TOUCH F630-101 - Personal settings - My Coffee; Editing personal user profiles; Selecting;changing personal settings; Preparing beverages with personal settings

Personal settings – "MyCoee"
42
GB
7 Personal settings
– "MyCoee"
The "My Coee" function lets you to save
personal beverage settings and assign
them to a user.
7.1 Editing personal user
proles
Up to four user proles can be used.
Changing the name of a user prole
The names of the user proles can be
changed.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the MyCoee menu.
3. Select a user and conrm your selec-
tion.
4. Select Change name and conrm your
selection.
» The menu for selecting individual
characters appears.
5. Select individual characters by turning
the "rotary switch" and conrm each of
them.
6. Repeatedly select the Exit command to
exit the menu.
Activating/deactivating a user prole
Only users whose prole is activated can
be used.
Requirement: The appliance is ready for
operation.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the MyCoee menu.
3. Select a user and conrm your selec-
tion.
4. Select Enabled/disabled and conrm
your selection.
5. Select Enabled or Disabled and conrm
your selection again.
6. Select the Exit command to exit the
menu.
7.2 Selecting/changing per-
sonal settings
Depending on the beverage, the following
settings can be assigned to a user:
Recipes, coee amount, amount of froth,
milk amount, hot water amount, coee
strength and temperature.
The assignment of personal settings to a
user is always similar. Setting the coee
amount for a Cappuccino is described here
as an example.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the MyCoee menu.
3. Select a user and conrm your selec-
tion.
4. Navigate to the Cappuccino > Coee
amount menu.
5. Select an amount and conrm your
selection.
6. Select the Exit command to exit the
menu.
» The next time a cappuccino is prepared
by the user, the selected amount of
coee is used.
7.3 Preparing beverages with
personal settings
The preparation of beverages using
the "My Coee" function is similar
for all beverages. The preparation of a cap-
puccino is described here as an example.
1. Place a vessel beneath the outlet.
2. Press the "myrecipes" button until the
desired user is shown on the display.
3. Press the "Cappuccino" button.
» Beverage dispensing is carried out
and ends automatically.
4. Remove the vessel.
» EasyCleaning? appears on the dis-
play. (Press rotary switch to start).
5. Run the EasyCleaning programme or
prepare further beverages and run the
EasyCleaning programme later, see
section9.4.