Melitta CI TOUCH F630-101 - Transport, storage and disposal; Changing the water filter; Removing the water filter; Venting the appliance

Transport, storage and disposal
50
GB
Changing the water lter
Change the water lter when the appli-
ance requests you to do so.
Requirement:
ū The appliance is ready for operation.
ū A container (0.7l) is placed beneath the
spout.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Change
lter menu.
3. Select Start and conrm your selection.
4. Follow the further instructions on the
display.
Removing the water lter
The water lter should not be left standing
dry for a long period of time. When it is
not used for a long time, we recommend
storing the water lter in a vessel lled
with tap water in the refrigerator.
Requirement: The appliance is ready for
operation.
1. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
2. Navigate to the Care > Filter > Remove
lter menu.
3. Select Start and conrm your selection.
4. Follow the further instructions on the
display.
» The water hardness is automatically
reset to the previous setting.
» The appliance is ready for operation.
10 Transport, storage and
disposal
10.1 Venting the appliance
We recommend venting the appliance
when it is not used for a long period, prior
to transport and when there is a risk of
frost.
During venting, residual water is removed
from the appliance.
Requirements:
ū The water lter is removed.
ū The appliance is ready for operation.
1. Place a vessel beneath the outlet.
2. Press the "rotary switch" for 2 seconds.
» The menu appears on the display.
3. Navigate to the System > Venting menu.
4. Select Start and conrm your selection.
5. Follow the further instructions on the
display.
» The appliance heats up.
» The appliance is vented and then
switches o completely.