22
Warning!
Danger of re and electric shock due to
incorrect supply voltage, incorrect or damaged
connections and power cord.
– Ensure that the supply voltage agrees with
the supply voltage speci ed on the type
plate of the appliance.
– Ensure that the power outlet meets the
applicable standards for electrical safety. If
in doubt contact a quali ed electrician.
– Never use damaged power cords
(damaged insulation, bare wires).
– Only have the damaged power-supply
cord replaced by the manufacturer or by
quali ed specialists.
– Appliance is only to be used with the stand
provided.
– Never place the appliance on hot surfaces
or in wet areas.
To Next Page
Loading...
