EasyManua.ls Logo

Melitta LATTEA - Setting the timer for the auto-off function

Melitta LATTEA
268 pages
Go to English
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
62
Display Time
15 minutes
(factory setting)
30 minutes
1 hour
ashing
off
Press the On / Off button to conrm the selected time.
All symbols in the display ash briey for conrmation. The appliance is
ready for operation, the standby symbol is illuminated.
Note
Press the brewing strength button to wake the machine out of energy-
saving standby mode. You can then directly dispense coffee.
Setting the timer for the auto-off function
Additional information on auto-off function is provided on page 59. The timer is
factory-set to level 1 (1 hour).
Prerequisite: The appliance is ready for operation, the standby symbol
is illuminated.
Adjust the timer as follows:
Simultaneously press the button for single-cup dispensing and the
button for two-cup dispensing for more than 2 seconds.
The standby symbol is ashing.
Press the button for single-cup dispensing three times to call the
menu for the Auto-Off function.
The symbol for the drip tray is illuminated.
Heft_Lattea_EU.indd 62 09.07.2009 15:29:04

Table of Contents

Related product manuals